Why does my Janome Sewing Machine needle thread keep breaking?
The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is inserted incorrectly. * The thread is too heavy for the needle. * The needle thread has not set in the thread holder when embroidery sewing started.
Why is my Janome Memory Craft 11000 Sewing Machine so noisy?
Your Janome sewing machine might be noisy because threads have been caught in the hook mechanism or the feed dog is packed with lint.
Why does my Janome Sewing Machine bobbin thread break?
The bobbin thread may break because it is not threaded properly in the bobbin holder, lint has collected in the bobbin holder, or the bobbin is damaged and does not turn smoothly. If the bobbin is damaged, replace it.
Why is my Janome Memory Craft 11000 Sewing Machine cloth not feeding smoothly?
The cloth may not feed smoothly because the feed dog is packed with lint, the presser foot pressure is too weak, the stitches are too fine (make stitches longer), the fabric is not fed when sewing is starting, or the feed dog is lowered.
What causes seam puckering on my Janome Memory Craft 11000?
Seam puckering may be caused by the needle tension being too tight, the needle thread or the bobbin thread not being threaded correctly, the needle being too heavy for the fabric being sewn, the stitch length being too long for the fabric (make stitches shorter), the presser foot pressure not being adjusted correctly (when sewing extremely lightweight materials place interfacing underneath the fabric), or the fabric not being stretched tightly enough on the embroidery hoop.
What causes patterns to be distorted on my Janome Memory Craft 11000?
Distorted patterns on your Janome sewing machine may occur because the needle thread tension is too light, the stitch length is not suitable for the fabric being sewn, the feed balancing dial is not properly set, interfacing is not used for sewing stretch and very fine fabrics (use an interfacing), the embroidery hoop attaching knob is loose, the embroidery hoop is hitting something around the machine, the fabric is not stretched tightly enough on the embroidery hoop, the fabric is caught or trapped when sewing embroidery (stop the machine and free the fabric), or the embroidery foot is trapped with a jump thread (trim the jump thread).
What to do if my Janome Sewing Machine is making a crunching sound?
If your Janome sewing machine is making a crunching sound, it could be because something is caught between the carriage and the arm (remove the object) or the carriage is hitting something around the machine.
What to do if my Janome Sewing Machine isn't running?
If your Janome sewing machine does not run, it may not be plugged in, a thread is caught in the hook race, the control circuit is not working correctly (turn the switch off and turn it on again), or the start/stop button is used for ordinary sewing with the foot control plugged in.
Why are layers slipping when I sew with my Janome Memory Craft 11000 Sewing Machine?
Slipping layers may occur because the presser foot pressure is not adjusted correctly or the even feed foot is not used. Try using the even feed foot.
Why are the automatic buttonhole stitches not balanced on my Janome Sewing Machine?
The automatic buttonhole stitches may not be balanced because the stitch length is not suitable for the fabric being sewn, the feed balancing dial is not set properly, or interfacing is not used with stretch fabric (use an interfacing).
General| USB Ports | Yes |
|---|---|
| Screen | Color LCD Touch Screen |
| Connectivity | USB |
| Needle Threader | Automatic |
| Memory | Yes |
| Type | Computerized |
| Maximum Embroidery Speed | 800 stitches per minute |
| Bobbin System | Top-loading |
| LCD Screen | Color LCD |
| Buttonholes | 10 |
| Presser Feet | Included |
To Next Page