Need help?Do you have a question about the Janome Memory Craft 400E and is the answer not in the manual?
General| Type | Embroidery Machine |
|---|---|
| Embroidery Field | 200mm x 200mm |
| Built-in Designs | 160 |
| Built-in Fonts | 6 |
| Display | LCD Touchscreen |
| Connectivity | USB |
| LCD Screen | Yes |
| Automatic Thread Cutter | Yes |
| Embroidery Area | 7.9" x 7.9" (200mm x 200mm) |
| Stitch Length | 5mm |
| Stitch Width | 7mm |
| Bobbin | Horizontal rotary hook |
| Presser Feet Included | Embroidery Foot |
Safety warning regarding electric shock.
Safety warning for burns, fire, electric shock, or injury.
Identifies machine parts and lists included accessories.
Covers power connection, buttons, and key functions.
Guides on setting spools, winding, and inserting bobbins.
Covers threading, needles, and hoop attachment.
Details the available function keys on the Ready to Sew screen.
Explains the details displayed about the selected embroidery pattern.
Covers stitch navigation, jump key, and color section viewing.
Allows tracing patterns and using thread/jog keys.
For making precise adjustments to design position or angle.
Accesses thread colors and manual settings.
Returns the hoop to the home or standby position.
Shows an example of the final embroidered output.
How to choose hoops and open designs for editing.
Explains the various tools available in the editing window.
Guides on duplicating, deleting, resizing, rotating, and flipping patterns.
Covers monogramming in arcs and grouping patterns.
Adjusts screen colors for design preview and interface.
Reduces color sections in combined designs for efficiency.
Changes pattern sequence and centers patterns.
Creates frames and allows continuous single-color sewing.
Magnifies or reduces the view of patterns in the editor.
Special designs for creating appliqués with background fabric.
Instructions for creating custom flag garlands with designs.
Guides for making bracelets using water-soluble stabilizer.
Enters the mode for adjusting general machine settings.
Adjusts screen contrast, volume, units, and calibration.
Covers memory formatting, standby timer, sensors, and defaults.
Configures auto thread tension, bobbin warning, and speed.
Calibrates hoops and controls hoop confirmation messages.
Manages automatic thread trimming based on settings.
Selects thread brands and colors for design simulation.
Toggles grid lines and manages resume mode.
Sets the display language for the machine's messages.
Manages saving and retrieving embroidery designs.
Creates new directories and renames files or folders.
Removes selected design files or folders from storage.
Accesses saved embroidery designs from memory or USB.
Detailed steps for cleaning the hook and bobbin holder area.
Instructions for cleaning lint and wax from the thread path.
Guides on lubricating the needle bar, presser bar, and take-up lever.
Instructions for oiling the machine's oil wick.
Guides on oiling lower shaft supporters and carriages.
To Next Page