Why does the needle thread keep breaking on my Janome MEMORY CRAFT 4900 QC?
The needle thread may break due to several reasons: * The needle thread isn't threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle and bobbin threads are not set under the presser foot when starting to sew. * The thread is either too heavy or too fine for the needle.
Why is my Janome Sewing Machine needle breaking?
The needle might be breaking in your Janome Sewing Machine for a few reasons: * The needle could be incorrectly inserted. * The needle clamp screw may be loose. * The threads might not be drawn to the rear after sewing. * The needle might be too fine for the fabric being used.
What to do if my Janome MEMORY CRAFT 4900 QC does not work?
If your Janome Sewing Machine does not work, check if: * The machine is plugged in. * Thread has been caught in the hook race. * The bobbin winder spindle is not returned to the left after bobbin winding.
Why is the bobbin thread breaking on my Janome MEMORY CRAFT 4900 QC Sewing Machine?
The bobbin thread may break because it is not threaded properly in the bobbin holder, lint has collected in the bobbin holder, or the bobbin is damaged and doesn't turn smoothly. If the bobbin is damaged, exchange it.
Why is the cloth not feeding smoothly in my Janome MEMORY CRAFT 4900 QC?
If the cloth is not feeding smoothly through your Janome Sewing Machine, it could be because: * The feed dog is packed with lint. * The stitches are too fine. Try making the stitch coarser. * The feed dog is not raised after "drop feed" sewing.
Why is my Janome MEMORY CRAFT 4900 QC Sewing Machine not running smoothly and making noise?
If your Janome Sewing Machine is not running smoothly and is noisy, it may be because thread has been caught in the hook race or lint has built up in the hook race or bobbin holder.
What causes stitches to form loops below the fabric with my Janome MEMORY CRAFT 4900 QC?
If your Janome Sewing Machine's stitches form loops below the fabric, it might be due to: * The needle thread tension being too loose. * The needle being either too heavy or too fine for the thread.
Why is the buttonhole not sewing properly on my Janome MEMORY CRAFT 4900 QC?
If the buttonhole is not sewn properly on your Janome Sewing Machine, it could be because the stitch density is not suitable for the fabric being sewn, or a suitable interface material has not been used for stretch or synthetic fabric.
General| Maximum Stitch Width | 7mm |
|---|---|
| Maximum Stitch Length | 5mm |
| Needle Positions | 91 |
| LCD Screen | Yes |
| Automatic Needle Threader | Yes |
| Built-in Needle Threader | Yes |
| Needle Threader | Yes |
| Drop Feed | Yes |
| Speed Control Slider | Yes |
| Start/Stop Button | Yes |
| Needle Up/Down Button | Yes |
| Automatic Thread Cutter | Yes |
| Lighting | LED |
| Foot Pressure Adjustment | Yes |
| Knee Lifter | Yes |
| Mirror Imaging | Yes |
| Elongation | Yes |
| Lock Stitch Button | Yes |
| Speed Control | Yes |
| Free Arm | Yes |
To Next Page