Janome MEMORY CRAFT 4900 QC - Function Touchpad; Clear Key; Memory Key

22
!6!6
!6!6
!6 Function touchpad (see page 12)
•Direct pattern selection
You can select the stitch patterns from q to o directly
in mode 1 (direct pattern selection mode).
• Number keys
Enter the 2-digit pattern number to select the desired
stitch pattern in mode 2, 3 and monogramming.
!4!4
!4!4
!4 Stitch width adjustment key
(see page 58, 60, 70)
Press “+” or “–” to change the stitch width.
!5!5
!5!5
!5 Stitch length adjustment key
(see page 58, 60, 70)
Press “+” or “–” to change the stitch length.
21 3
4
987
0
65
!8!8
!8!8
!8 Memory key (see page 60, 132, 136)
The memory key will memorize your pattern selection.
Press the memory key after you selected the stitch pattern.
(You can program up to 50 patterns in the memory.)
!7!7
!7!7
!7 Clear key (see page 156)
When this key is pressed, the last memorized stitch or
the stitch that is above the cursor will be deleted.
Press and hold the “C” key to clear the entire pattern
combination.
If this key is pressed after sewing a pattern
combination, the sequence will be deleted.
!4
!5
!6
!7 !8