Janome MEMORY CRAFT 4900 QC - GETTING READY to SEW Connecting the Power Supply; To Use Start;Stop Button; To Use Foot Control

14
To use start/stop button
Turn off the power switch, then insert the machine plug into the
machine and the power supply plug into the wall outlet. Turn on the
power switch.
GETTING READY TO SEW
Connecting the Power Supply
To use foot control
Turn off the power switch, insert the foot control plug and machine
plug into the machine, then the power supply plug into the wall
outlet in this order.
Turn on the power switch.
q Power supply cord
w Machine socket for power supply cord
e Outlet
r Power switch
t Machine socket for foot control plug
y Foot control plug
u Foot control
CAUTION
Always turn the power switch off and unplug the sewing machine
from the electrical outlet when the machine is not in use.
NOTE:
The start/stop button cannot be used when the foot control is
connected to the machine.
q
we
r
r
q
w
e
t
y
u