Janome MEMORY CRAFT 4900 QC - Stitch Width Adjustment Key; Stitch Length Adjustment Key; Mode Selection

24
zz
zz
z Mode 1
Screen indication
You can select 10 of the most commonly used patterns directly by
pressing the pattern keys.
The LCD screen shows the following information:
q Pattern number and image of the selected stitch.
w Recommended setting for needle thread tension.
e Recommended presser foot.
r Stitch width or needle drop position.
t Stitch length.
y Recommended foot pressure
u Twin or single needle (See page 64).
xx
xx
x Mode 2 and 3
You can select stitch patterns from #01 to #99.
Patterns #01 to #10 in mode 2 are programmable patterns
equivalent to the patterns in mode 1.
cc
cc
c Monogramming mode
Pressthisbuttontochangethemonogramfont.
q Blockstyleletters
w BlockstyleEuropeanletters
e Scriptstyleletters
r ScriptstyleEuropeanletters
t Broadwaystyleletters
y BroadwaystyleEuropeanletters
q
we
r
t
u
y
q
e
t
z
x
c
Mode selection
When you switch on the machine, the direct select mode
(mode 1) is activated. Press the mode key to change the
mode.
w
r
y