164
Correcting distorted stitch patterns
The sewing results of the stretch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
If stretch patterns, letters or numbers are distorted, correct
it with the feed balancing dial.
q Feed balancing dial
w Neutral position
e Setting mark
e
w
q
Stretch stitch pattern
Example:
If the pattern is compressed, turn the feed balancing dial in
the direction of “+”.
If the pattern is drawn out, turn the feed balancing dial in
the direction of “–”.
Letters and numbers
Example:
If the pattern is compressed, turn the feed balancing dial in
the direction of “+”.
If the pattern is drawn out, turn the feed balancing dial in
the direction of “–”.
To Next Page
Loading...
