Janome MEMORY CRAFT 4900 QC - Round-End Buttonholes (#18); Keyhole Buttonholes (#20); Adjusting Buttonhole Width on Stitch Pattern #18; Adjusting Buttonhole Width on Stitch Pattern #20

90
Press the stitch width adjustment key, the adjustment
window opens.
Press “+” to make the buttonhole wider.
Press “–” to make the buttonhole narrower.
Adjusting buttonhole width on stitch
pattern #20
qwe
Adjusting buttonhole width on stitch pattern
#18
Press the stitch width adjustment key, the adjustment
window opens.
Press “+” to make the buttonhole wider.
Press “–” to make the buttonhole narrower.
q Stitch width 2.5
w Stitch width 4.0
e Stitch width 5.5
* The stitch width should be adjusted between 5.5 to 7.0.
18
20
qw
e
Round-end buttonholes (#18)
Machine settings
q Pattern: 18 (mode 2)
w Presser foot: Automatic buttonhole foot R
e Thread tension: AUTO
* The sewing procedue is same as buttonhole #17
(see pages 80 to 82).
Keyhole buttonholes (#20)
Machine settings
q Pattern: 20 (Mode 2)
w Presser foot: Automatic buttonhole foot R
e Thread tension: AUTO
* The same sewing sequence (Buttonholes 18 and 20)
applies to buttonholes 19, 21, 22
qw
e
qwe
q Stitch width 5.5
w Stitch width 6.5
e Stitch width 7.0
* The stitch width should be adjusted between 5.5 to 7.0.