Need help?Do you have a question about the Janome Memory craft 4000 and is the answer not in the manual?
General| Buttonhole Styles | 4 |
|---|---|
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Built-in Needle Threader | Yes |
| Free Arm | Yes |
| Drop Feed | Yes |
| Speed Control | Yes |
| Built-in Memory | Yes |
| Type | Electronic |
Instructions to reduce the risk of electric shock.
Instructions to reduce risk of burns, fire, electric shock, or injury.
How to adjust sewing speed using the foot control and speed lever.
Select patterns directly using pattern selection buttons.
Select stitch patterns by entering two numbers.
Instructions on placing the spool of thread on the spool pin.
Steps to remove the bobbin from the bobbin case.
Detailed steps for winding thread onto the bobbin.
Step-by-step guide for using the automatic needle threader.
How to bring the bobbin thread up to the needle area.
Basic steps to begin sewing a straight stitch.
How to pivot the fabric to change sewing direction.
Securing the end of a seam with reverse stitches or lock stitch.
How to manually set the stitch length for straight stitches.
How to adjust the needle's lateral position.
Instructions for using the automatic thread tension setting.
How to adjust thread tension manually for balanced stitching.
How to adjust the stitch width for zigzag patterns.
Using the overedge foot for zigzag overcast.
Using the special overcast foot for an overlock stitch.
Overview of different buttonhole types and their uses.
Detailed steps for sewing a sensor buttonhole.
Procedure for sewing rounded and keyhole buttonholes.
How to adjust width and density for buttonholes.
Preparing the fabric edge for blind stitch hemming.
Steps for sewing a blind stitch hem.
Adjusting needle position for blind hemming.
How to adjust stitch width and length for bartacking.
How to use memory function for bartacking.
How to adjust darning to ensure even stitches.
Attaching the zipper foot to the machine.
Instructions for sewing a zipper.
Instructions for sewing triple cording.
Instructions for sewing single cording.
How to sew an edge finish using a specific stitch.
Instructions for sewing a shell stitch.
Programming a sequence of decorative stitch patterns.
Combining multiple patterns into a sequence.
Sewing patterns in a mirror image.
Programming and using alphabet and number stitches.
Using pre-programmed patterns that lock automatically.
Combining letters in block style for programmed text.
Combining large and small letters for programmed text.
Combining letters with spaces for programmed text.
Verifying and correcting programmed stitch patterns.
Removing patterns from memory without adding new ones.
Deleting existing patterns and adding new ones.
Detailed steps for cleaning the bobbin holder, hook race, and feed dog.
Instructions for correctly reassembling the hook race.
To Next Page