42
z x
c
Creating a square frame
z Select pattern Geometric Design SQ14B-56.
Move the design up and to the right.
x Press the corner layout key.
The pattern will automatically be copied and placed
symmetrically into 4 corners.
Press the OK key.
q Corner layout key
c The ready to sew window will open.
q
Single color sewing
If you want to sew a pattern or a pattern combination in
one color only, press the single color sewing key q.
The machine will not stop until the entire design is sewn.
z Press the single color sewing key q.
x Press the OK key.
z x
c
c The design(s) will be displayed in gray.
Press the start/stop button to start single color sewing.
The design will be sewn without stopping for color
change.
q
To Next Page
Loading...
