30
Color list key
Press the down arrow key q or up arrow key w to show
the next set of function keys.
Press the color list key e to view a list of thread colors
employed in the selected design.
r t
Press the stitch number key r to view a number of
stitches for each color in the selected design.
Press the spool key t to view a list of thread colors
employed in the selected design.
y
i Cutting the tails of jump threads
This option is can be used when the “jump thread cutting
length” setting or “cutting command“ is activated (refer to
page 53).
Press the “+” or “–” key to adjust the tail length of jump
thread.
Adjust key
Press the adjust key to open the manual setting window.
You can adjust the following settings in this window.
y Adjust key
u Auto thread tension level
Press the “+” or “–” key to adjust the thread tension to
your preference.
w
e
q
u
i
To Next Page
Loading...
