Janome Memory Craft 400E - Programming a Monogram; Color Change; Monogram Placement

23
e Right Justify
Press the key to sew from the right end reference line
on the template.
w Center Justify
Press the key to sew in the center of the hoop.
q Left Justify
Press the key to start sewing from the left end
reference line on the template.
Monogram placement
You can select one of 3 monogram placements: left
justify, center justify and right justify.
Programming a Monogram
Example: Programming “R&B” in Gothic style font.
Enter “R”, the cursor shifts to the right and “R” is
automatically memorized.
Press the letter size key and select small size.
q Letter size key
Enter “&”, the cursor shifts to the right and “&” is
automatically memorized.
Press the letter size key and select medium size.
Enter “B”, the cursor shifts to the right and “B” is
automatically memorized.
Press the OK key.
The hoop conrmation window will appear.
The screen changes to the ready to sew window.
NOTE:
The hoop conrmation window will not be displayed
if the hoop conrmation option is turned off (refer to
page 51.).
Color change
You can sew a multi-colored monogram by changing the
thread color of each letter if you press the color change
key before sewing. The color change key changes to
when the color change function is activated.
The machine will stop automatically when each character
has been sewn.
Change the thread to the next color and start sewing
again.
w Color change key
w
q
w
e
q