Janome Memory Craft 15000 - Printing the Template Sheet; Marking the Centerlines

145
12 cm (5˝)
12 cm (5˝)
Printing the template sheet
Click Application>Print and print the template sheets
and design layout.
Cut the template sheet along the cutting line.
Cutting line
Marking the centerlines
Prepare a quilt top, base fabric and batting.
Lightweight battings for machine quilting are
recommended.
Add at least 12 cm (5˝) outer margin to the embroidery
area when deciding the overall quilt size.
Draw centerlines and arrowhead with a washable marker.
Pin or baste all layers together.
Ifthetemplatesheetisprintedon2pages,cuteach
section out and glue them together as shown.
Save the AcuFil design pattern on a USB flash drive.
NOTE:
You can transfer the design pattern to the machine
and save it to the machine’s built-in memory with the
direct PC-Link.
Place the template sheet on the quilt to check the general
arrangement.
Mark the centerlines q for each section on the quilt top.
q Centerlines
q