Why does my Janome Memory Craft 15000 threads frequently bunch up on the underside of the stippling design pattern?
Threads may bunch up on the underside of the stippling design pattern if the minimum length of the jump thread cutting is too short.
General| Embroidery Designs | 480 |
|---|---|
| USB Ports | 2 |
| Needle Positions | 91 |
| Needle Threader | Automatic |
| Bobbin Winder | Automatic |
| Lighting | 10 white LED lamps in 5 locations |
| Built-in Memory | Yes |
| Sewing Speed | 1000 stitches per minute |
| Screen | Color Touchscreen |
| Connectivity | Wi-Fi, USB |
| Type | Sewing and Embroidery Machine |
| Embroidery Area | 9.1" x 11.8" |
| Buttonholes | 13 (automatic) |
| Hoops Included | GR Hoop (9.1" x 11.8"), SQ23 Hoop (9.1" x 9.1"), FA10 Hoop (3.9" x 1.6") |
To Next Page
