Janome Continental M7 Professional - Lapped Zipper Sewing Steps; Stitching Zipper Tape Sides; Finishing Zipper Teeth Stitching

q w
q w
2.8 mm
r
e
103
Altering blind hem stitch width
Press the “+” key in the row w to increase the stitch width
e.
Press the “–” key in the row w to decrease the stitch
width e.
NOTE:
You can move the left needle drop position r with the
“+” or “–” key in the row q.
Adjusting the needle drop position
Press the adjust key to expand the manual setting
window.
Press the “+” key q in the upper row to move the needle
drop positions to the left.
Press the “–” key w in the upper row to move the needle
drop positions to the right.
The needle drop position will change, while the stitch
width (2.8 mm) remains consistent.
The distance between the left needle drop position and
guide of the foot is indicated in millimeters.
NOTE:
You can alter the stitch width by changing the right
needle drop position.