JANOME Embroidery Software Instruction Book
Chapter 14 Automatic Digitizing
108
By contrast, the image below is not suitable as it
does not contain enough detail and has poor
contrast.
For improved results, you may need to edit images
using an image editing tool such as Corel Paint
Shop Pro, Photo-Paint or Adobe Photoshop.
Try this! You can print design images directly
onto a special fabric or transfer via your inkjet
printer. Printed images can then be combined with
Photo Click to produce stitch highlights on the
image. See also Setting print options.
To create embroidery from photographs
1 Scan or load an image. See Scanning artwork into
EasyDesign for details.
2 Select a thread color.
3 With the image selected, click one of the Photo Click
icons.
If Photo Click Instantly is active, the photo will be
processed using the current settings and selected
thread color.
If Photo Click Advanced is active, the Object
Details > Photo Click dialog opens.
4 In the Resolution panel, select a resolution option –
Low, Medium, High, or Extra High.
The coarser the resolution, the more spacing between
rows.
5 In the Background panel, select a background option:
Try this! The option you select usually depends on
whether the fabric is light or dark. The Dark option
produces a negative of the image.
6 In the Fill panel, adjust the Grain Angle as required.
This determines the angle of the stitches.
Option Purpose
Light Applies the maximum row width to the
lightest part of the image.
Dark Applies the maximum row width to the
darkest part of the image.
Low resolutionHigh resolution
Dark backgroundLight background
To Next Page
Loading...