JANOME Embroidery Software Instruction Book
Chapter 4 Basic Procedures
28
2 Select one of the available machine model sets.
3 Click OK.
This becomes the default machine type until you
change it. Menu options change depending on which
machine set is chosen:
If you choose the MC11000, the Machine menu
items will appear as shown. See Outputting to
MC11000 machines for details.
If you choose the MC10001 and MC10000 V3.0 or
higher option, the Machine menu items will appear
as shown. See Outputting to MC1000* machines for
details.
If you choose the MC10000 V2.21 option, the
Machine menu items will appear as shown. See
Outputting to MC10000 V2.21 machines for details.
If you choose the MC9700, MC9500, MC300E,
MC350E, or MC200E option, the Machine menu is
effectively deactivated. You have the option of using
the External Media menu only. See Outputting to
MC9700 or lower machines for details.
If you choose the MB-4 option, the Machine menu
items will appear as shown. See Outputting to MB-4
machine for details.
Creating new designs
When you start JANOME Embroidery Software, a
new file – Design1 – is automatically created,
ready for you to start digitizing. By default,
Design1 is based on the NORMAL template.
Templates contain pre-set styles, defaults or
objects, to make digitizing quicker and easier. If
there are custom templates defined, a New dialog
will appear allowing you to choose a different
template to base your design on. See Working with
design templates for details.
Try this! Whenever you create a new design, save
it with a new name. See Saving designs for details.
To create new designs
Click the New icon.
A blank design opens in the Design Window. See also
Digitizing with Artwork.
Select machine
model set
Send, receive and
delete designs from
machine
Send, receive and
delete designs from
machine
Click Standard > New to start a new design with
the NORMAL template.
Send, receive and
delete designs from
machine
Send, receive and
delete designs from
machine
To Next Page
Loading...