JANOME Embroidery Software Instruction Book
Chapter 1 Introduction
3
Viewing onscreen information
Onscreen documentation can be accessed from the
JANOME Embroidery Software Programs folder or
from the Help menu in JANOME Embroidery
Software. You can read it with Adobe Acrobat™
Reader. Quickly search for the information you
need using standard Adobe Acrobat™ Reader
features.
To view information onscreen
1 Open JANOME Embroidery Software and select the
help menu
JANOME Embroidery Software Release Notes.
2 Select the required document to open it in Adobe
Reader.
3 Select the topic you want by clicking on its ‘Bookmark’.
4 Change the view magnification in any of the following
ways:
Click the Actual Size, or Fit in Window, or Fit
Width buttons.
Select the Zoom In tool, then click anywhere on the
page – each click increases the magnification.
Click the Reader Zoom dropdown and select a
setting – try 200% if you want to look closely at
screen diagrams.
5 Use the page turning controls at the bottom of the
window to scroll backwards and forwards through the
book or return to previous views.
Try this! For comprehensive information about using
the application, refer to the Adobe Reader Help menu.
Using onscreen help
Onscreen Help can be accessed from the Help
menu in JANOME Embroidery Software.
To use the onscreen help
1 Select Help > Help Topics.
The EasyDesign Help window opens.
2 Click Contents to display the main list of topics.
Topics are grouped under high-level headings with
‘book’ icons.
3 Double-click a book to view the list of topics, then
double-click a topic.
Alternatively, click Find and enter keywords to search
on a specific subject.
Linking to the JANOME website
You can access sales and support information
about the products easily from within the software.
To link to the JANOME website
Select Help > JANOME Web Page. You are directly
connected to the JANOME homepage at:
http://www.janome.com/
Note You must have a correctly configured web
browser on your system together with web access.
Conventions used in the manual
This manual adopts the following conventions:
Commands
Commands on a submenu are referred to by both
the submenu and command name. For example
the Select All command in the Edit menu is
referred to as Edit > Select All.
Dialog boxes
Dialog boxes are referred to as ‘dialogs’ and are
shown in the manual only if they provide important
information on using JANOME Embroidery
Software. The screen images provided are
intended to be representations, not exact
Bookmarks
Fit in Window
Fit WidthActual Size
Zoom dropdown
Page turning controls
Paging settings
To Next Page
Loading...
Need help?
General
