JANOME Embroidery Software Instruction Book
Chapter 16 Arranging and Transforming Objects
125
Try this! Use the Move To Center tool to
automatically move selected object/s to the center of
the work area. Press Enter to confirm.
To create a circular layout
1 Insert a design and/or select a design/s or object/s
already on-screen.
2 Click the Display Layout Work Area icon to toggle
display of the defined work area. See also Defining
work areas.
3 Move them to the desired position in the work area.
Warning If you want the selected design/s or object/s
to sew out in a separate hooping, make sure it is
grouped before proceeding. See Hooping large
designs for details.
4 Select the Copy To Circle method.
5 Use the spin box control to define the number of
copies.
These are shown in wireframe and placed equidistant
around the center of the work area. Each copy is
rotated about the center of the work area according to
the number of copies created.
6 Click the Apply button or press Enter to confirm.
7 Insert or create additional designs as required.
Try this! Use the Move To Center tool to
automatically move selected object/s to the center of
the work area. Press Enter to confirm.
To Next Page
Loading...