JANOME Embroidery Software Instruction Book
Chapter 17 Reshaping and Editing Objects
131
Note In Circle objects, the stitch angle is
perpendicular to the line connecting the entry point
to the circle center. Thus, changing the stitch entry
point in a Circle object changes its stitch angle.
To change entry and exit points
1 Select the object to change.
2 Click the Reshape icon.
Control points appear, including entry and exit points.
Note In Circle objects, only the entry point appears.
3 Select the entry or exit point as required, and drag it to
a different position on the object outline.
4 Press
Esc to finish.
Entry
point
Entry
point
Entry
point
Exit point
Entry point
Exit point
To Next Page
Loading...