JANOME Embroidery Software Instruction Book
Chapter 20 Stitch Editing
157
To split stitch blocks
1 Select the object you want to split.
2 If working in EasyEdit, click the Stitch Mode icon.
3 Travel to the stitch needlepoint where you want to split
the object. See Traveling by stitches for details.
Try this! In EasyEdit, simply click the needle point at
which you want to split the stitch block.
4 Click the Split Block icon.
This splits the object at the selected needlepoint –
stitches that come before and after in the stitching
sequence are split into separate objects or ‘stitch
blocks’.
Deleting stitches
You can delete individual or groups of selected
stitches.
Warning If an object’s stitches are regenerated
for any reason, all stitch editing functions are lost.
Where possible, edit the object details rather than
individual stitches. See Adjusting Satin stitch
spacing, Adjusting Weave Fill stitch spacing and
Adjusting Embossed Fill spacing for details.
To delete stitches
1 In EasyEdit, click the Stitch Mode icon.
2 Select a stitch or stitches.
3 Press Delete.
Use Edit > Stitch Mode to select individual stitches
for deletion.
Locate the needle
point at which you
want to split the object
Split into two blocks
Select stitches
Press
Delete
To Next Page
Loading...