JANOME Embroidery Software Instruction Book
Chapter 22 Editing Embroidery Lettering
170
Editing lettering
When you have created a lettering object, you can
select it and make changes to it directly on-screen
or by adjusting object details.
To edit lettering
Select a lettering object, and click the Lettering icon.
An I-beam appears after the last letter of the object.
You can move it using arrow keys.
Edit the text as required:
Use the arrow keys to move between letters.
Use
Backspace and Delete keys to remove letters.
Press
Enter to complete.
Try this! Press Shift + Enter to start a new line.
With the lettering object selected, change fonts by
selecting another font from the Font list on the
Lettering toolbar.
Adjust lettering Size and Width settings as required.
See also Scaling lettering.
Change slant settings as required.
Change orientation settings as required. See Setting
lettering orientations for details.
Try this! Alternatively, double-click a selected lettering
object or objects. The Object Details > Fill Stitch
dialog opens. Select the Lettering tab and edit settings
as required.
Note Letters are filled with stitches according to
current details in the Object Details > Fill Stitch tab.
See also Changing lettering stitch types.
Scaling lettering
When you first create lettering, it may be too big
or too small. Size can be adjusted in three ways:
By scaling on-screen with the Select or
Reshape tools.
By adjusting size and height settings in the
Object Details > Lettering dialog.
By adjusting width and height settings in the
Object Details > Dimensions dialog.
Click Lettering > Lettering to edit lettering
on-screen.
Select font
Adjust Size and Width
settings
Change
orientation
Change
slant
Edit text
Adjust
details
To Next Page
Loading...