JANOME Embroidery Software Instruction Book
Chapter 25 Reading and Writing Design Files
202
Note For detailed procedures relating to your
particular machine, see Outputting to Machine.
Writing multiple designs to ATA PC card
As with single designs, the procedure for writing
multiple designs to ATA PC card varies slightly with
the machine model. Select the machine model you
intend to write to and select External Media >
Write Designs, Read and Erase. The particular
dialog which opens will depend on the current
machine model.
In addition to writing design files to machine, you
can generally receive or delete files from the
destination folder.
Note For detailed procedures relating to your
particular machine, see Outputting to Machine.
Select files to
write
Use buttons to
navigate folders of
display file list
Select source
folder on your PC
Click to read Click to erase
To Next Page
Loading...