Janome DigitizerPro - Appendix G Troubleshooting; Solving problems in JANOME Embroidery Software

281
Appendix F
Weave Fill Samples
The patterns shown in this appendix are a part of your JANOME Embroidery
Software program. Make sure you apply the correct stitch angle to each
pattern. The following samples have been digitized with a stitch angle of 0°.
Experiment with different stitch angles to get new effects. See Creating weave
fills for details.
No Stitch sample
Needle point
preview
1
2
3
4
5
6
7
8
9
10
11
12
No Stitch sample
Needle point
preview