JANOME Embroidery Software Instruction Book
Chapter 5 Viewing Designs
34
To zoom in on a section of the design, press the B key
on your keyboard, then drag a bounding box around
the zoom area.
To pan across a design in the Design Window, select
View > Pan or press P. Move the ‘pan box’ over the
part of the design you want to view and left-click.
EasyDesign centers the Design Window around the
point you clicked.
Working with the Overview Window
Use the Overview Window to view a thumbnail of
the design. The window updates whenever you
make a change and can be used to zoom in or pan
across the Design Window. See also Zooming and
panning designs.
Note To change the view settings for the Overview
window, click it to make it the active window. See
Design viewing modes for details.
To work with the Overview Window
1 Click the Overview Window icon.
The Overview window opens.
2 To zoom in or out, click the Zoom button at the bottom
of the window and drag a bounding box around the
area to zoom.
3 To pan across the design, move the cursor inside the
zoom box – it changes to a four-way arrow cursor – and
drag it.
Use View > Overview Window to toggle Overview
window display on/off. Use it to view a thumbnail
of the design.
Click & drag
bounding box around
area to zoom
Place ‘pan box’
over area to view
and click
Click for
zoom box
Drag bounding
box around area
to zoom
Drag zoom
box to area to
pan
To Next Page
Loading...