Janome DigitizerPro - Page 45

JANOME Embroidery Software Instruction Book
Chapter 6 Selecting Objects
43
Selecting objects with Polygon
Select
Sometimes the Select tool does not provide fine
enough control. The Polygon Select tool lets you
select individual objects by drawing an outline
around them. Use Polygon Select to select
objects with a bounding box.
To select objects with Polygon Select
1 Click the Polygon Select icon.
2 Mark reference points around the object/s you want to
select.
The objects you want to select must be completely
within the outline.
3 Press Enter to select.
Selecting objects while traveling
through a design
In EasyDesign, you can select objects as you
‘travel’ through the design. Traveling is usually
associated with checking the stitching sequence.
See also Selecting stitches while traveling.
To select objects while traveling through a
design
1 Click the Jump by Object icon and travel through the
design, stopping just before the object to select. See
Traveling by object for details.
2 Click the Select icon.
3 Click the Stitch Select While Traveling icon.
4 Continue traveling through the design.
As you travel, objects are selected.
5 When you have finished selecting, click the Stitch
Select While Traveling icon again to turn it off.
Note If an object is already selected, it is deselected
when you travel through it.
 To select more objects, continue traveling with Ctrl
held down.
 To leave an object out of the selection, release Ctrl
before you travel through it.
Selecting colors while traveling
through a design
In EasyDesign, you can select colors as you ‘travel’
through the design. Traveling is usually associated
Click Edit > Polygon Select to select objects with
a bounding box.
Click Edit > Select to select objects.
Click View > Jump by Object to travel by objects.
Click View > Stitch Select While Traveling to
select objects while traveling.
Mark reference points around
object/s to select
Click Edit > Select to select objects.
Click View > Jump by Color to travel by color.
Click View > Stitch Select While Traveling to
select colors while traveling.
Stop before the first object to
be selected
Objects change color as they
are selected