JANOME Embroidery Software Instruction Book
Chapter 7 Grids and Hoops
54
3 In the Format panel, select Rectangle or Oval as
required.
4 Adjust the settings in the Dimensions panel as
required:
For an oval hoop, enter Rectangle Height, Total
Height and Width.
For a rectangular hoop, enter the Height and the
Width of the rectangle.
Try this! You can create a circular hoop by entering ‘0’
in Rectangle Height field and setting Width and Total
Height fields to the same size.
Warning In order to avoid the possibility of the needle
hitting the rim of the hoop, the size definition must be of
the embroidery area of the hoop and not its
external dimensions.
5 Save the new or edited hoop definition:
If you are saving a modified hoop, click the Save
Hoop button.
If you are saving the definition as a new hoop, click
the Save Hoop As button and enter a hoop name in
the Save Hoop As dialog.
6 Click Save.
7 Click OK to close the Work Environment dialog.
Select
required
hoop type
Define
hoop
dimensions
Define hoop
dimensions
My rectangle hoop
To Next Page
Loading...