JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
67
Adjusting Embossed Fill size
You can change the size of a pattern to get
different effects.
To adjust Embossed Fill size
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Size field, enter the size you require.
3 Click
OK.
Adjusting Embossed Fill spacing
The Embossed Fill spacing setting determines the
distance between patterns. You can change the
horizontal (X) and vertical (Y) spacing between
each repetition.
To adjust Embossed Fill spacing
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Spacing fields, enter a new spacing value.
This value is the distance between patterns – X is the
horizontal and Y the vertical spacing.
To increase spacing, enter a smaller value.
To decrease spacing, enter a larger one.
3 Click
OK.
Adjusting Embossed Fill stitch angle
You can change the stitch angle to get the best
results for each angle.
To adjust Embossed Fill stitch angle
1 Select and double-click the Embossed Fill object.
The Object Details > Fill Stitch dialog opens.
2 In the Rotate field, enter the rotation angle you require.
3 Click
OK.
Adjust pattern size
Size 5.00 mmSize 7.00 mm
Spacing X
increased
Spacing Y
increased
Adjust pattern spacing
Spacing X
increased
Spacing Y
increased
Adjust pattern orientation
To Next Page
Loading...