JANOME Embroidery Software Instruction Book
Chapter 9 Outline & Fill Stitches
70
digitized line. The stitches follow the digitized line
but maintain uniform density and needle
penetration patterns. The digitizing method varies,
depending whether you are applying the effect to
new or existing objects.
To create a Florentine effect
1 Create a Weave Fill object. See Creating weave fills for
details.
2 Click the Florentine Effect icon.
Try this! Use the Reshape Object tool to change the
shape of the curve. See Reshaping objects for details.
Creating decorative outlines
EasyDesign provides a range of decorative stitches
for use as borders. Available stitch types include
backstitch, stemstitch, and candlewicking.
Try this! You can also create decorative stitch
effects with pattern runs. See Creating motif runs
for details.
Creating backstitch outlines
Backstitch is an older-style, adaptable stitch which
can be used for delicate outlines. This stitch follows
intricate curves well.
To create a backstitch outline
1 Click the Backstitch icon and digitize a backstitch
outline as you would a run stitch outline. See Digitizing
lines for details.
2 Double-click to access object details.
3 If not already applied, select Backstitch Line from the
Stitch Type list.
4 Adjust the Stitch Length and Stitch Thickness as
required.
5 Adjust the Overlap as required.
Use Digitize > Backstitch to digitize backstitch
outlines.
Stitch Length:
1.5 mm
Stitch Length:
3.0 mm
To Next Page
Loading...