JANOME Embroidery Software Instruction Book
Chapter 2 System Setup
6
Adobe Acrobat Reader
As well as the JANOME Embroidery Software
software itself, you will require a recent version of
Adobe Acrobat Reader. You can download Acrobat
Reader from the Adobe website.
Warning You need to log on with Administrator
level rights in order to install the software.
System security
JANOME Embroidery Software is controlled by a
security device or ‘dongle’ attached to the
computer. The software will not work properly if
the dongle is unplugged from the computer while
JANOME Embroidery Software is open. In this
event, the application may hang or crash and any
open files may be corrupted.
JANOME Embroidery Software Full Kit is shipped
with a USB security dongle. Each dongle has a
unique serial number and identity code so your
system can be uniquely recognized. The security
device plugs into a USB port on your computer. If
your computer does not have a USB port, you will
need to install a USB card. Parallel port dongles are
not supported.
Warning The dongle is the most important and
valuable part of your system and should be treated
with care. Always store it in a safe place when not
in use. The dongle is guaranteed against defects in
material and workmanship – under normal use and
service when properly installed – for a period of 90
days from the date of delivery. If it is faulty, it may
be exchanged. If it is physically damaged, return it
to your distributor and a replacement can be
purchased. However, in case of loss or theft, you
will need to purchase an entire JANOME
Embroidery Software replacement system. For this
reason, you should consider insuring your dongle.
Upgrading dongles
If you are upgrading from an earlier version of
JANOME Digitizer software, you will need to
upgrade the previous dongle using the ‘upgrade
dongle’ from the Upgrade Kit. Follow the dongle
upgrade process after the computer is rebooted in
order to transfer serial number and identity code
from the old dongle to the new. While JANOME
Embroidery Software now only uses USB dongles,
you can upgrade from older-style parallel dongles
as well as older USB dongles. See Installing
JANOME Embroidery Software Upgrade for details.
Component Recommended
CPU 1 Ghz 32-bit (x86) processor
Operating System Windows® XP® SP2 or later or
Windows® Vista®
Internet Browser † MS I.E. 7 or above
Memory (RAM) 1GB or higher
Hard Drive 40 GB or higher
Free Disk Space 1 GB
Monitor 15" or larger for on-screen
digitizing
Graphics Card 128Mb or higher
(non-integrated)
Screen Resolution 1280 x 1024 pixels
CD-ROM Drive Any late model drive
Machine Connection Optional
Scanner, Printer, Plotter
Connection
Optional
Dongle Connection Dedicated USB port
Mouse Serial, PS/2 or USB
Sound Card Recommended for training
material
† Internet connection required by certain parts of the system as
well as for access to product information and online support.
To Next Page
Loading...