10
r
t
y
u
c Slip the thread through the slit and down into the
eye of the take-up lever as shown. Draw the
thread down through the left channel.
r Slit
t Eye of the take-up lever
v Slip the thread behind the lower thread guide
from the right.
y Lower thread guide
b Slip the thread in the needle bar thread guide
from the left.
u Needle bar thread guide
Thread the needle from front to back by hand or use the
built-in needle threader.
NOTE:
Refer to page 11 for built-in needle threader
c
vb
To Next Page
Loading...
