Janson Controls FC100-2S-2.2G - User Manual

1
.
Preface
Thank you for purchasing the FC100 series AC drive developed by our company.
FC100 series AC drive is a compact small power AC drive. It is an economic model
specialized for the small automation equipments, especially for electronic equipments,
food packaging, woodworking and other applications.
FC100SeriesACDriveFeatures
AdvancedV/FControl / Vector ControlAlgorithm:
Adjustable V/F Control is more stable at low speed, high torque output at low
frequency
and better dynamic performance.
.
MultipleFunctions:
Multi-stage speed control, simple PLC, PID and pulse counting control.
.
StableandReliableAnti-tripFunction:
Stable and reliable overvoltage/overcurrent stalling control algorithm, non-stop
control
function to prevent frequent trip in complex applications.
This manual describes the functions and features and correct use of FC100 series
AC drive, including product selection, parameter setting, running commissioning,
troubleshooting and routine maintenance and other related matters. Please read
this manual carefully to make sure the correct installa-tion and operation and
maintenance to achieve the high performance of this AC drive. Please hand this
manual to the users and keepers of this AC drive.
.
UnpackingInspectionCautions
Every AC drive have been tested strictly in factory prior to shipment. Upon
unpacking, check:
Whether the product is damaged;
Whether the nameplate model and AC drive ratings are consistent with your
order.
Whether the box contains the AC drive, certificate of conformity, user manual
and
warranty card. If you find any omission or damage, contact our company or your
supplier immediately.
FC100 Series
Preface

Janson Controls FC100-2S-2.2G Specifications

General

Brand	Janson Controls
Model	FC100-2S-2.2G
Category	Controller
Language	English

Summary

Chapter 1 Product Information

1.5 Specifications

Presents detailed technical specifications covering electrical, environmental, and control characteristics.

Chapter 2 Storage and Installation

2.2 Installation

Instructions and precautions for the correct and safe installation of the AC drive.

Chapter 3 Wiring Diagram and Terminal Explanation

3.1 Basic Wiring Diagram

Illustrates the fundamental wiring connections for the AC drive's power and control circuits.

3.2 Terminal Explanations

Defines the function of each terminal on the AC drive for proper connection.

3.3 Control Terminals Explanations

Details the specific functions and explanations for the control terminal connections.

3.4 Main Circuit Wiring

Covers the wiring procedures for the AC drive's main power input and motor output circuits.

3.5 Wiring Notes

Chapter 4 Keypad Operation

4.1 Description of Digital Keypad

4.2 Detailed way for how to use keypad

Step-by-step instructions on how to navigate and operate the AC drive using the keypad.

Chapter 6 Description of Parameter Settings

Group P1: Basic Parameters

Chapter 7 Maintenance and Inspection

6.1 Periodic Inspection

6.2 Periodic Maintenance

Regular maintenance tasks, including tightening screws, cleaning, and checking components.

Chapter 8 Troubleshooting and Fault Information

Common Problems and Solutions

A table listing common operational problems, their possible causes, and corrective actions.