Janson Controls FC100-4T-4.0G - User Manual

1
.
Preface
Thank you for purchasing the FC100 series AC drive developed by our company.
FC100 series AC drive is a compact small power AC drive. It is an economic model
specialized for the small automation equipments, especially for electronic equipments,
food packaging, woodworking and other applications.
FC100SeriesACDriveFeatures
AdvancedV/FControl / Vector ControlAlgorithm:
Adjustable V/F Control is more stable at low speed, high torque output at low
frequency
and better dynamic performance.
.
MultipleFunctions:
Multi-stage speed control, simple PLC, PID and pulse counting control.
.
StableandReliableAnti-tripFunction:
Stable and reliable overvoltage/overcurrent stalling control algorithm, non-stop
control
function to prevent frequent trip in complex applications.
This manual describes the functions and features and correct use of FC100 series
AC drive, including product selection, parameter setting, running commissioning,
troubleshooting and routine maintenance and other related matters. Please read
this manual carefully to make sure the correct installa-tion and operation and
maintenance to achieve the high performance of this AC drive. Please hand this
manual to the users and keepers of this AC drive.
.
UnpackingInspectionCautions
Every AC drive have been tested strictly in factory prior to shipment. Upon
unpacking, check:
Whether the product is damaged;
Whether the nameplate model and AC drive ratings are consistent with your
order.
Whether the box contains the AC drive, certificate of conformity, user manual
and
warranty card. If you find any omission or damage, contact our company or your
supplier immediately.
FC100 Series
Preface

Janson Controls FC100-4T-4.0G Specifications

General

Brand	Janson Controls
Model	FC100-4T-4.0G
Category	Controller
Language	English

Summary

Chapter 3 Wire Diagram and Terminal Explanation

3.5 Wiring Notes

Chapter 5 Function Parameters Table

Basic Function Parameters (P100-P219)

Core operational parameters for frequency, start/stop, and protection.

Input and Output Function Parameters (P300-P325)

Parameters for configuring analog/digital inputs, outputs, and terminal functions.

Secondary Application Group (P400-P433)

PLC Control Parameters (P500-P533)

Parameters for PLC functions, multi-speed settings, and sequence control.

PID Control Parameters (P600-P616)

Parameters for configuring the PID control loop for process automation.

RS485 Communication Parameters (P700-P702)

Advanced Application Parameters (P800-P810)

Chapter 6 DESCRIPTION OF PARAMETER SETTINGS

Group P1: Basic Parameters

Core operational parameters for frequency, start/stop, and protection.

Group P2: Parameters of basic applications

Group P3: Input and Output Function Parameters

Parameters for configuring analog/digital inputs, outputs, and terminal functions.

Group P4: Secondary Application Group

Group P5: PLC Control(Special Operation)

Parameters for PLC functions, multi-speed settings, and sequence control.

Group P6: PID Control

Parameters for configuring the PID control loop for process automation.

Group P7: RS485 Communication

Group P8: Advanced application parameters

Chapter 7 Maintence and Inspection

6.1 Periodic Inspection

6.2 Periodic Maintenance

Procedures and precautions for maintaining the AC drive's condition and longevity.

Chapter 8 Troubleshooting and Fault Information

Common Problems and Solutions

Table detailing common operational issues, their possible causes, and corrective actions.

Troubleshooting Steps

General troubleshooting steps and parameter checks for resolving issues.