JAP FUSIONESCO MULTI CHOP - Using Your; Preparing the Chopper

13
English
PREPARING THE CHOPPER
CAUTION: The chopper can not be turned on unless it is assembled correctly
following the instructions.
1. Take the engine compartment and the lid o of the chopper. [FIG. 1]
2. Place the blades on the attachment point. [FIG. 2]
3. Put the ingredients in the bowl. [FIG. 3]
CAUTION:
• Remove all inedible parts and cut the food in parts of 1-2 cm.
• Do not go over the MAX marking on the bowl to avoid overow.
4. Place the lid on the bowl and the engine compartment on the lid. [FIG. 4]
Using your
FIG. 1 FIG. 2 FIG. 3 FIG. 4