EasyManua.ls Logo

Jardine MADISON DA333BC User Manual

Default Icon
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL # DA333BC- MADISON SINGLE CRIB (NATURAL)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Follow warnings on all products in a crib.
*
*
*
*
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color
and a detailed description of the part.
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our
customer service representative (address & phone number shown above) for replacement parts and
instructional literature if needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be
used.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
E-MAIL: csr@jardcoent.com
WARNING
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
DO NOT use a water mattress with this crib.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
Assemble on soft, smooth surface to prevent damage to product finish.
Phillips head screw driver is not included.
DO NOT use power tools.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT
EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
NOTES
Ensure all parts and components are present before beginning assembly.
Question and Answer IconNeed help?

Do you have a question about the Jardine MADISON DA333BC and is the answer not in the manual?

Jardine MADISON DA333BC Specifications

General IconGeneral
BrandJardine
ModelMADISON DA333BC
CategoryBaby & Toddler Furniture
LanguageEnglish

Summary

General Safety Warnings

WARNING

Critical safety warnings and instructions for crib use to prevent serious injury or death.

Product Care, Maintenance, and Warranty

Care and Cleaning

Instructions on how to clean and maintain the crib's finish, avoiding damage.

Maintenance

Guidance on periodic checks for fasteners and general upkeep to ensure crib integrity.

Limited Warranty

Details on the product's warranty coverage, including defect repair and limitations.

Assembly Guide and Parts List

Hardware and Part List

An inventory of all parts and hardware required for assembling the crib.

Step-by-Step Assembly Instructions

Step 1: Attaching Back Posts to End Panels

Connects right back post to right end panel, and left front post to left end panel.

Step 2: Attaching Front Posts to End Panels

Connects right front post to right end panel, and left front post to left end panel.

Step 3: Attaching Stationary Side

Attaches the stationary side panel to the left and right back posts.

Step 4: Attaching Stabilizing Bar

Secures the stabilizing bar to the end panels using bolts.

Step 5: Attaching Mattress Support

Installs the mattress support to the four corner posts using specific bolts.

Drop Side Assembly and Operation

Detailed instructions for installing, operating, and securing the drop side.

Related product manuals