Jarre Technologies AeroBull HD - Advanced Functions and Care; Wireless Stereo Mode; Maintenance and Care

Music Life LTD Documentation
Page 4
1.
2.
3.
4.
5.
6.
1.
2.
a 3.5 mm audio cable
an audio device with Line out 3.5 mm port
To enable line-in mode you can connect a 3.5mm jack to the AeroBull HD® and play audio directly from your favourite device. Line-in port is
located at the back of the AeroBull HD® next to the Micro USB port.
(image: Line-in at the back of the AeroBull HD®)
Wireless Stereo Mode
What do you need:
2 AeroBull HD®
a bluetooth device
AeroBull HD® ships with true wireless technology which allows wireless stereo mode. With true wireless you can enable right and left channel
wirelessly using two speakers.
Enable True Wireless
To enable True Wireless take the following steps:
Power On speaker first (i.e. plug in the power)one
Pair the Bluetooth device of your preference to the speaker and wait for the jingle "device connected".
Put the speaker into left channel mode by holding down at the same time for about 3 seconds Volume down and Power button until
you hear the jingle "left channel".
Power On the other speaker (i.e. plug in the power)
Put the speaker into right channel by holding down at the same time for about 3 seconds Volume up and Power button until you
hear the jingle "right channel".
Wait a few seconds for the jingle "device connected".
Disable True Wireless
To disable True Wireless mode take the following steps:
Un-pair the Bluetooth Device from the speaker.
Press volume up and volume down buttons on both devices for about 3 seconds until you hear the jingle "true wireless off".
(image: show image sequence on how to enable true wireless for AeroBull HD®)
Maintenance and Care
Maintenance may include periodically cleaning the AeroBull®.
8.1. Cleaning
Turn off the AeroBull HD® and unplug it before cleaning.To clean the exterior, use a soft, dry cloth.
DO NOT USE SOLVENTS OR SPRAYS.
DO NOT ALLOW LIQUIDS TO SPILL OR OBJECTS TO DROP INTO ANY AeroBull HD® OPENING.
8.3. Battery precautions
The battery must not be open.
The battery must not be short circuit.
The battery cannot be replaced.
CAUTION
There is a danger of explosion if battery is incorrectly handled. Do not put the product into fire as it may explode or leak.