Volume control is located on the top of the Glasses of the AeroBull HD® ( ) . The Volume canimage: Show the volume control of AeroBull HD®
be increased or decreased by simply pressing either + button for volume up or - button for volume down.
Led Light Indicator
AeroBull HD® has Two LED light indicators, WHITEBLUE
AeroBull HD® has two LED indicators: Glasses and Paw.
Blue LED is located under the right Paw . The White LED is located between the glasses below the Volume Up and Down buttons (
image: show
)LED location on AeroBull HD®
Led Specifications
LED MODE DESCRIPTION
Glasses Power On White LED Steady mid-low brightness
Glasses Dock Mode White LED Steady mid-low brightness
Glasses Line-in mode White LED Steady mid-low brightness
Glasses Software upgrade mode White LED flashes every second
Glasses MAX and MINIMUM Volume reached Flash White LED once
Paw Audio Streaming Blue LED breathing effect ( Breathing effect lasts 3 seconds )
Paw Paring Mode Blue LED Blinking
Paw Device Connected Blue LED steady ON
Input Mode
AeroBull HD® supports 3 kinds of input mode: Docking (via lightning connector), Bluetooth and Line-in mode
iPod® - iPhone® Docked mode
This mode is active when an iPhone® or iPod® is docked on the lightning connector located on top of the AeroBull HD®(image:
lightningconnector on top of the AeroBull HD®)
Bluetooth mode
What do you need:
A bluetooth device
1 AeroBull HD®
To enable Bluetooth turn On AeroBull HD® the product will automatically go into pairing mode if no other device is connected. Then access
Bluetooth on your device and go to the list of available devices. Look for between the list of the available devices then selectAeroBull HD®
AeroBull HD® to connect to the speaker. If AeroBull HD® does not appear on the list, please turn your speaker Off and then back On. Once
you have successfully connected to the AeroBull HD®, the Blue LED Light Indicator located under the right Paw of the AeroBull HD® will show a
steady blue colour, you will now be able to stream audio.
If your bluetooth device supports NFC you will be able to use the feature by tapping your NFC device on the top of theOne Touch Pairing
AeroBull HD® (Close to the Docking). The NFC sensor is located on the top of the product above the the Glasses.
Line-in mode
What do you need:
1 AeroBull HD®
a 3.5 mm audio cable
To Next Page
Loading...