Jarvis 444 Wellsaw User Manual

Model 444 Wellsaw
Electric Powered
Reciprocating Saw
TABLE OF
CONTENTS Page.........................
EQUIPMENT
SELECTION Ordering No..............
Model 444 (115V)
End Cutting with 8 inch Blade 4005254..
End Cutting with 16 inch Blade 4005256.
Heavy Duty with 8 inch Blade 4005250...
Heavy Duty with 16 inch Blade 4005252.
Model 444 (230V)
End Cutting with 8 inch Blade 4005255..
End Cutting with 16 inch Blade 4005257.
Heavy Duty with 8 inch Blade 4005251...
Heavy Duty with 16 inch Blade 4005253.
Accessories
Balancer 4042037.....................
• Safety Messages to Employer and
Safety Director 2...................
• Safety Messages to Operators,
Maintenance and Cleanup Personnel 3
• Parts Diagram 4....................
• Parts List 6........................
• Specifications 7....................
• Installation Instructions 7............
• Operation Instructions 8.............
• Maintenance Instructions 9..........
®
JARVIS
6205004;:.
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457-4926
UNITED STATES OF AMERICA E--MAIL.
jarvis.products.corp@snet.net
FAX. 860-347-6978 TEL. 860--347--7271 WWW. jarvisproducts.com

Jarvis 444 Wellsaw Specifications

General

Brand	Jarvis
Model	444 Wellsaw
Category	Saw
Language	English

Summary

Model Equipment Selection

Employer Safety Directives

Operator and Maintenance Safety

Wellsaw Parts Diagram

Wellsaw Parts List

Model 444 Specifications

Wellsaw Installation Guide

Optional Balancer Installation

Guidance for installing the optional balancer accessory for the Model 444.

Power Supply Requirements

Details on voltage, frequency, and extension cord use for the Wellsaw.

Extension Cord Guidelines

Wellsaw Operation Guide

Cutting and Ripping Techniques

Proper methods for cutting and ripping materials with the reciprocating saw.

Plunge Cutting Method

Instructions for safely performing plunge cuts with the reciprocating saw.

Wellsaw Maintenance Procedures

Gear Case Lubrication

Procedure for checking and maintaining the gear case grease level.

Blade and Support Installation

Steps for installing blades with standard and heavy-duty blade supports.

Blade Support Mounting

Procedure for attaching the blade support to the tool housing.

Motor Disassembly Guide

Step-by-step instructions for taking apart the motor housing.

Drive Shaft Assembly Process