Jarvis EBS-1 User Manual

TABLE OF CONTENTS Page................
Models EBS--1
42 V, 3 phase 50 Hz 4005094..........
115 V, 3 phase, 50 Hz 4005095........
380/220 V, 3 phase 60 Hz 4005096.....
400/230 V, 3 phase 50 Hz 4005097.....
415 V, 3 phase 50 Hz 4005098.........
460/230 V, 3 phase, 60 Hz 4005099....
575 V, 3 phase, 60 Hz 4005123........
Models EBS--1--H (Horns)
380/220 V, 3 phase 60 Hz 4005101.....
400/230 V, 3 phase 50 Hz 4005117.....
480/240 V, 3 phase 60 Hz 4005111.....
575 V, 3 phase 60 Hz 4005138.........
Model EBS--1--HS (Hog Splitter)
42 V, 3 phase 50 Hz 4005113..........
400/230 V, 3 phase 50 Hz 4005120.....
Blades
9.5 inch 1023083.....................
10.5 inch 1023084..................
11.5 inch 1023215..................
13 inch 1023230.....................
Balancer (for all Models) 4042034.........
Model EBS--1, --H and --HS
Electric Beef Brisket, Horn and
Hog Splitting Saws
EQUIPMENT SELECTION Ordering No...
• Notice to Employer and Safety
Director 2...........................
• Notice to Operators, Maintenance
and Cleanup Personnel 3..............
• Parts Diagram and List 4..............
• Specifications 7......................
• Installation Instructions 7..............
• Operation Instructions 7...............
• Maintenance Instructions 8............
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--MAIL.
jarvis.products.corp@snet.net
TEL. 860--347--7271 FAX. 860--347--6978 WWW. jarvisproducts.com
JARVIS
®
6205012:.

Jarvis EBS-1 Specifications

General

Brand	Jarvis
Model	EBS-1
Category	Saw
Language	English

Summary

Notice to Employer and Safety Director

Notice to Operators, Maintenance and Cleanup Personnel

Parts Diagram and List

Specifications, Installation and Operation Instructions

Specifications

Details on motor power, operating voltages, blade lengths, and physical dimensions of the saw models.

Installation Instructions

Guidance on how to properly mount and connect the saw, including safety precautions and wiring.

Operation Instructions (Initial)

Initial guidance for safe and effective use, pre-operation tests, and cutting procedures.

Operation and Maintenance Instructions

Operation Procedures

Detailed steps for operating the saw, including safety tips and cutting techniques.

Maintenance Instructions

Guidelines for daily and monthly maintenance tasks, including greasing and inspections.

Crank Disassembly

Step-by-step guide for taking apart the saw's crank mechanism.

Crank Assembly

Reverse steps for reassembling the saw's crank mechanism.

Motor Disassembly

Procedure for removing the motor from the saw housing.

Motor Assembly

Instructions for reassembling the motor components back into the saw.

Rear Handle Disassembly

Procedure for dismantling the rear handle section of the saw.

Rear Handle Assembly

Steps to reassemble the rear handle section of the saw.