Jarvis 404 Wellsaw User Manual

Model 404 Wellsaw
Air Powered Reciprocating
Saw
TABLE OF
CONTENTS Page.........................
EQUIPMENT
SELECTION Ordering No..............
Model 404 115V
End Cutting, 4TPI, 8 in Blade 4005220.....
Heavy Duty, 4TPI, 8 in Blade 4005221.....
End Cutting, 4TPI, 16 in Blade 4005224....
Heavy Duty, 4TPI, 16 in Blade 4005225....
Model 404 230V
End Cutting, 4TPI, 8 in Blade 4005222.....
Heavy Duty, 4TPI, 8 in Blade 4005223.....
End Cutting, 4TPI, 16 in Blade 4005226....
Heavy Duty, 4TPI, 16 in Blade 4005227....
Blades
4 TPI, 8 inch, End Cutting 1023122........
4 TPI, 8 inch, Heavy Duty 1023123........
4 TPI, 16 inch, End Cutting 1023121.......
4 TPI, 16 inch, Heavy Duty 1023124.......
Supports
8 inch blade, End Cutting 1058071........
8 inch blade, Heavy Duty 1058075........
16 inch blade, End Cutting 1058070.......
16 inch blade, Heavy Duty 1058074.......
Accessories
Jarvis Wellsaw Blade Lubricant 1062023...
Balancer 4042028.......................
• Safety Messages to Employer and
Safety Director 2...................
• Safety Messages to Operators,
Maintenance and Cleanup Personnel 3
• Parts Diagram and List 4............
• Specifications 6....................
• Installation Instructions 6............
• Operation Instructions 6.............
• Maintenance Instructions 7..........
NOT FOR HOME USE
JARVIS
6205006;:.
®
Cutlerymania.com is an authorized online parts distributor supplying
Original Jarvis Products. .
E-mail: info@cutlerymania.com
FAX: 973-751-7701 Telf: 973-751-7775 www.cutlerymania.com

Jarvis 404 Wellsaw Specifications

General

Brand	Jarvis
Model	404 Wellsaw
Category	Saw
Language	English

Summary

Safety Messages to Employer and Safety Director

Disconnect Power When Idle

Always disconnect the tool from its power supply when it is not in use.

Employee Training and Awareness

Ensure all employees are trained on proper use and aware of potential dangers.

Manage Malfunctioning Equipment

Remove and repair any malfunctioning tool immediately. Instruct personnel accordingly.

Prohibit Modifications and Ensure Labels

Never make tool modifications; replace any missing or illegible labels.

Safety Messages to Operators, Maintenance and Cleanup Personnel

Remove Malfunctioning Tools Promptly

Remove any malfunctioning tool from service and report problems to supervisor.

Adhere to Lockout/Tagout Procedures

Disconnect power using OSHA's lockout/tagout procedures before any service.

Disconnect Power When Not in Use

Always disconnect the power supply when the tool is not in use.

Avoid Contact with Cutting Edge

Never put fingers, hands, or body parts on the cutting edge or in the cutting path.

Use Both Hands for Operation

Always use both hands for starting and operating to prevent kickback or recoil.

No Alterations and Label Integrity

Installation Instructions

Operation Instructions

Maintenance Instructions

Lubrication Schedule

Blade Support Installation

Blade Removal Procedure

Blade Installation Procedure