Jarvis Buster IV User Manual

TABLE OF
CONTENTS Page.........................
Buster IV Band Saw
460/230V--60Hz 4006030...........
380/220V--50Hz 4006032...........
Spring Balancer 4042052.................
Air Balancer (4 feet overall length) 4042016.
Air Balancer (10 feet overall length) 4042020
Standard Blade (119 inches) 1023101......
Cut Tooth Blade (119 inches) 1023339.....
JET Blade (119 inches) 1023619..........
• Safety Messages to Employer and
Safety Director 2...................
• Safety Messages to Operators,
Maintenance and Cleanup Personnel 3
• Parts Diagram and List 4............
• Specifications 11...................
• Installation Instructions 11...........
• Operation Instructions 13............
• Maintenance Instructions 14.........
• Motor Wiring Diagrams 16...........
PRODUCTS CORPORATION
33 ANDERSON ROAD, MIDDLETOWN, CONNECTICUT 06457--4926
UNITED STATES OF AMERICA E--MAIL. jarvis.products.corp@snet.net
TEL. 860-347-7271 FAX. 860-347-6978 WWW.jarvisproducts.com
Model Buster IV
Beef Splitting Band Saw
EQUIPMENT
SELECTION Ordering No..............
JARVIS
®
6206001;:

Jarvis Buster IV Specifications

General

Brand	Jarvis
Model	Buster IV
Category	Saw
Language	English

Summary

Safety Messages to Employer and Safety Director

Safety Messages to Operators, Maintenance and Cleanup Personnel

Idler End Parts Diagram and List

Drive End Parts Diagram and List

Motor and Gear Cover Parts Diagrams

Torque Knob Assembly

Details the assembly and components of the torque knob mechanism.

Blade Guide Assembly Diagrams

Illustrates the blade guide assemblies for both idler and drive ends.

Finned Motor and Gear Cover Diagram

Shows the parts breakdown for the motor housing and gear cover.

Handle Assemblies Diagrams

Hanger Assembly Diagram

Components and assembly of the saw's hanger mechanism.

Dual Handle Control Assembly Diagram

Parts list and diagram for the dual handle control system.

Top Handle Assembly Diagram

Breakdown of parts for the top handle assembly.

Export Handles and Rear Assembly Diagrams

Electric Handles for Export Tools Diagram

Parts for electrical handles intended for export markets.

Rear Handle Assembly Diagram

Components and list for the rear handle assembly of the saw.

Electric Motor Parts Diagram

Electric Motor with Smooth Housing Diagram

Detailed parts breakdown of the electric motor with a smooth housing.

Control Box Parts Diagram

Control Box with Starter 380V Diagram

Parts list for the control box, specifically for 380V starter configurations.

Specifications

Installation Instructions

Operation Instructions

Maintenance Instructions

Wiring Diagrams

Nine Wire Motor Hook-up Diagram

Wiring connections for nine-wire, 3-phase motors.

Six Wire Motor Hook-up Diagram

Wiring connections for six-wire, 3-phase motors.