iv
Regulatory Statements
CE Notice:
The symbol indicates that this JASCO system complies with the EMC
(Electromagnetic Compatibility) and Low Voltage Directives of the European
Community. Furthermore, this symbol indicates that this JASCO system meets the
relevant basic safety and health requirements of the EC Directive based on the
following technical standards:
• EN55011---- “Limits and Methods of Measurement of Radio Interference
Characteristics of Information Technology Equipment.” ----
Group 1, Class A.
WARNING: This is a Class A product. In a domestic environment this product may
cause radio interference, in which case the user may be required to
take adequate measures.
• EN50082-1---- “Electromagnetic compatibility”----Generic immunity standard
Part 1: Residential, commercial, and light industry.
• IEC1000-4-2---- “Electromagnetic compatibility for industrial-process
measurement and control equipment Part 2: Electrostatic
discharge requirements.”----Severity level 3.
• IEC1000-4-3---- “Electromagnetic compatibility for industrial-process
measurement and control equipment Part 3: Radiated
electromagnetic field requirements.”----Severity level 2.
• IEC1000-4-4---- “Electromagnetic compatibility for industrial-process
measurement and control equipment Part 4: Electrical fast
transient/burst requirements.”----Severity level 2.
• IEC1010-1---- 1990 + Amd.1:1992 + Amd.2: 1995----Safety requirements for
electrical equipment for measurement, control and laboratory
use.
• A “Declaration of Conformity” in accordance with the above standards has been
made and is on file at JASCO EUROPE srl, Via Confalonieri 25, 22060
CREMELLA (Lc), Italy.
To Next Page
Loading...
