Assembly
Assembly
Loosely secure the top of the faceplate.
make sure the handlebar is centered on the stem.
handlebar stem in place. Check it again to make
the handlebar stem in place.
Insert the handle bar into the fork locknut to the
desired height. Place the handlebar on the stem
correctly.
Move the seat up and down by sliding the seatpost
in or out of the seat tube. DO NOT raise the seatpost
the seatpost tube.
lever open and outward fully.
Adujst the seat and the head of the seat is
parallel with the top tube.
foot on the pedal. Your leg should be almost fully extended(not locked out) with a slight bend at the knee.
7 8
To Next Page
Loading...
