Start-up procedure
turn on the bike and select a pedal assist level following the steps below:
2. Ensure proper handlebar and seat adjustment. Note that lowering the seat so the rider can put one or
and properly secured.
3.
display and turn on.
4.
the backlight of LCD Display returns to it's original brightness.
5. Select the desired level of pedal assistance (PAS) between level 0~5 using the + and - on
Start in PAS level 0 or 1 and adjust from there.
the bike.
buton is recessed.
and reinsert it into the frame.
17
18
To Next Page
Loading...
