Assembly
1. Locate the stem and insert the
front fork into the stem.
3. Fold the handlebar perpendicular
to the ground.
4. Insert the screw into the nut. Twist
2. Unlock and pull up the latch on the
folding mechanism.
1 2
3 4
Assembly
5. Insert the handlebar into the
stem.
7. Tighten the screw again.
and right.
6. Make sure the LCD display and logo are
align with the center of the front fork. Note:
The folding latch is not in the center.
5 6
7 8
7
8
To Next Page
Loading...
