(1)
(2)
are properly secured and undamaged. Check that they are correctly secured before
Assembly
NOTICE: Ensure the seatpost and seat are
properly adjusted before riding. DO NOT
raise the seatpost beyond the minimum
tube (as shown at right). If the seatpost
projects from the frame beyond these
rider to lose control and fall. Ensure the
are inside the seat tube of the frame.
The suspension fork can move up and down up to 80mm to
cushion bumps in the riding sur which can make riding
on a rough road or trail smoother and more comfortable.
Depending on a rider’s preference the suspension fork can
be locked out as a rigid forkwhich will typically yield higher
ncy while pedaling.
The lockout lever (1) located on top of the right side of
the suspension focan be turned counterclockwise un
it stops to completely lock out the suspension fork’s travel.
To unlock the lockout leverturn the knob clockwise u
n
stops. When the lockout lever is unlocked resistance can
be adjusted by turning.
Assembly
1
13
14
√
×
To Next Page
Loading...
