EasyManua.ls Logo

JAVAC CC Series - User Manual

JAVAC CC Series
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CC Series
VACUUM PUMPS
OPERATING MANUAL

Other manuals for JAVAC CC Series

Questions and Answers

  • L
    Lydia TrevinoJul 28, 2025
    What to do if my JAVAC CC Water Pump has poor vacuum?
    • E
      Eric MorrisJul 28, 2025
      If your JAVAC Water Pump isn't creating a good vacuum, several factors could be the cause. First, check the oil level and add oil to the center line of the oil scale if it's insufficient. If the oil is emulsified or not clean, replace it with new oil. Also, inspect the oil inlet and filtering screen, cleaning them if blocked. Examine the pump hose and vessel for any leaks and repair them. Ensure you're using the correct size pump; if it's too small, use a larger one. Finally, worn components can cause poor vacuum, so consider repairing or replacing the pump.
  • K
    Kelly RichardsonAug 3, 2025
    Why is my JAVAC CC overheating?
    • G
      gomezbarbaraAug 3, 2025
      If your JAVAC Water Pump is overheating, there could be a few reasons: * If the temperature is below +5C, allow the temperature to rise. * If the motor is overloaded, wait 5 minutes and restart it, or press the motor reset if installed. * Check for any foreign matter that may have fallen into the pump and eliminate it.
  • S
    Scott KnightAug 9, 2025
    What to do if my JAVAC CC is discharging oil?
    • K
      Kevin ReillyAug 9, 2025
      If your JAVAC Water Pump is discharging oil, it could be due to a couple of reasons. First, there might be too much oil in the pump; in this case, drain the oil to the oil base line on the sight glass. Alternatively, the inlet pressure could be too high, so use a recovery pump to remove the excess pressure.
  • M
    Matthew ChaseAug 14, 2025
    Why is my JAVAC CC Water Pump leaking oil?
    • T
      Terry CookAug 14, 2025
      If your JAVAC Water Pump is leaking oil, it could be due to a damaged oil seal, which would need to be replaced with a new one. Alternatively, the oil casing gasket might be loose or damaged. Try tightening the screws, or replace the O-type ring if necessary.
  • J
    John HendersonAug 21, 2025
    How to fix a JAVAC CC that is difficult to start?
    • R
      Robert GibsonAug 21, 2025
      If your JAVAC Water Pump is having difficulty starting, it could be due to low voltage; avoid using long extension leads. Another reason could be that the pump is overheated, so check the fan and ventilation, and repair if needed. If you are in any doubt, consult JAVAC.

Summary

Application

Before starting

Caution

Safety precautions and warnings to be observed before operating the vacuum pump.

Trouble Shooting

Exploded Drawing

WARRANTY

JAVAC CC Series Specifications

General IconGeneral
CategoryWater Pump
ModelCC Series
Power SourceElectric
Voltage220-240V
Frequency50/60Hz

Related product manuals