Jay's Audio CDT2-MK3 - REMOTE CONTROL UNIT; BUTTON FUNCTIONS

WWW.JAYS-AUDIO.COM Page 8 of 10
REMOTE CONTROL UNIT
The CDT2-MK3 comes with a milled solid aluminium Remote Control Unit. It is a generic
Remote Control equipped for all CDT/CDP products; hence, it is not all the buttons are
functional with the CDT2-MK3.
 Power
 Open
 Track 0-9
 Play
 Pause
 Stop
 Next/Prev
 Fast Forward
 Repeat
 Random
 Program
 Vol +-
 Display
 Goto
 Scan
 Time
 Turn on/standby the CDT
 No function
 Select Track 0-9
 Begin CD playback
 Pause CD playback
 Stop CD playback
 Select Next/Prev track
 Fast Forward/Backward the track time
 Repeat Mode
 Random track playback
 Toggle 44.1kHz / 176.4kHz Output
 No function
 To dim/turn off the display
 No function
 Scan & Play 1
st
10s of the Tracks
 Switch between Disc/Track/Remain
Time
Figure 4. Remote Control Unit
*NOTE: Due to shipping regulation, the Remote Control was shipped without batteries.
Please insert two AAA batteries into the Remote Control battery compartment.