19
Input
Select
Select “encryption” way and then input code in “network secret key”. It will be OK by pressing enter.
Note: 1) The settings of “encryption” “identity authorization” and “network secrete key” must be
matched with wireless router you want to connect with, or it can not connect with the
network.
2) Some individual router may probably not be connected after using for sometime.
Connection shall be carried out after deletion. Explore wireless network again and carry out
corresponding wireless connection settings.
4. After setting user name and code etc. click [OK] to explore wireless network connection and then it will
indicate it has been connected, (when the network is not found, it needs to wait for some time. It also can not
surf the internet when failing to connect). It is illustrated in the following figure:
To Next Page
Loading...
General