Jaybird Run - Charging the Charge Case; Charging the Case; Case Status LED Indicators; Full Charge Duration for Case

9
CHARGING – CHARGE CASE
To charge the Charge Case use the provided USB cable and plug it into a USB power supply.
The LED in the middle of the Charge Case will indicate the charging status of the case as well as the earbuds.
Green LED pulses = charging
Green LED solid = fully charged
When the charge case runs low on battery the LED
will turn red for about 10 seconds on opening or
closing the lid.
A full charge can take up to 3 hours.
CHARGE CASE
STATUS LED